View NJW1155_285700.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NJW1155
AUDIO PROCESSOR with SOUND ENHANCEMENT and SRS 3D STEREO
s GENERAL DESCRIPTION The NJW1155 is an audio processor that includes Sound enhancement (BBE) and SRS 3D Stereo. It includes all of the audio signal processing functions for TV such as tone control, balance, volume, mute, and AGC . The SRS 3D stereo technology reproduces 3D stereo surround sound effect using only two speakers. The sound enhancement regenerates high definitive and nearly real sound. 2 All of internal status and variables are controlled by I C BUS interface. s PACKAGE OUTLINE
NJW1155M
s FEATURES Operating Voltage 7.5 to 13V 2 I C BUS Interface BBE Sound Enhancement (Low Boost and High Boost: 15dB max.) AGC Circuit (It reduces volume difference among input sources.) SRS 3D Stereo Simulated Surround Bi-CMOS Technology Package Outline SDMP30
s BLOCK DIAGRAM
VOL1
BBE
TONE
VOL
I2C Bus Interface
AGC
SRS 3D Stereo & Simulated Surround
VOL1
BBE
TONE
VOL Bias
-1-
NJW1155
s PIN FUNCTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 INa BBE1a BBE2a TONEDC1a TONEDC2a TONE-Ha TONE-La OUTa AGC SRS/SS-FIL1 VOL2 INa BBEOUTa SDA SCL GND INb BBE1b BBE2b TONEDC1b TONEDC2b TONE-Hb TONE-Lb OUTb SRS-FIL2 VREF VOL2 INb BBEOUTb AUX0 AUX1 Vcc 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Symbol
INa BBE1a BBE2a TONEDC1a TONEDC2a TONE-Ha TONE-La OUTa AGC SRS/SS-FIL1 VOL2 INa BBE OUTa SDA SCL GND Ach Input
Function
Ach BBE Filter1 (Process) Ach BBE Filter2 (Lo Contour) Ach Tone Output Ach Volume2 Input Ach Treble Filter Ach Bass Filter Ach Output AGC Filter SRS and Simulated Stereo Filter1 Ach Input From the Other Accessories Ach Output for the Other Accessories SDA Data Input (I2C BUS) SCL Data Input (I C BUS) GND
2
No
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Symbol
Vcc AUX1 AUX0 BBE OUTb VOL2 INb VREF SRS-FIL2 OUTb TONE-Lb TONE-Hb TONEDC2b TONEDC1b BBE2b BBE1b INb Auxiliary Output1 Auxiliary Output0
Function
Power Supply Pin
Bch Output for the Other Accessories Bch Input from the Other Accessories Reference Voltage SRS Surround Filter2 Bch Output Bch Bass Filter Bch Treble Filter Bch Volume2 Input Bch Tone Output Bch BBE Filter2 (Process) Bch BBE Filter1 (Lo Contour) Bch Input
-2-
NJW1155
s ABSOLUTE MAXIMUM RATING (Ta=25C)
PARAMETER Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V
+
RATING 15 700 -20 to +75 -40 to +125
UNIT V mW C C
PD Topr Tstg
s ELECTRICAL CHARACTERISTICS ( Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified)
PARAMETER Operating Voltage Supply Current Reference Voltage Maximum Input Voltage Maximum Output Voltage Channel Balance Balance Boost A Balance Cut A Balance Boost B Balance Cut B Total Harmonic Distortion Maximum Gain Minimum Gain Channel Separation Output Noise 1 Output Noise 2 SYMBOL V
+
TEST CONDITION
MIN. 7.5
TYP. 9.0 13 4.5 3.0 2.5 0.0 0.0 0.0 0.005 0.0 -100 (10) -105 (5.6) -
MAX. 13.0 25 5.0 -70 -70 0.01 -70 -70 -90 (32) -95 (18) 5.0
UNIT V mA V Vrms Vrms dB dB dB dB dB % dB dB dB dBV (Vrms) dBV (Vrms) V
ICC VREF VIM VOM GCB BABST BACUT BBBST BBCUT THD GVMAX GVMIN CS VNO1 VNO2 VAUX
No Signal No Signal VOL=-20dB,THD=10% OUTPUT VOL=0dB,THD=1% VOL=0dB CHS="0",BAL="11111" CHS="1",BAL="11111" Vin = 1Vrms CHS="1",BAL="11111" CHS="0",BAL="11111" Vin = 1Vrms Vo=0.5Vrms BW=400Hz to 30kHz VOL= 0dB VOL= MUTE Vin = 2Vrms VOL = 0dB A-weighted VOL = MUTE A-weighted Logic Output : High
4.0 2.8 4.5 0
AUX Output Voltage
Logic Output : Low
0.3
BW : Band Width
-3-
NJW1155
TONE CONTROL
PARAMETER High Frequency Boost High Frequency Flat High Frequency Cut Low Frequency Boost Low Frequency Flat Low Frequency Cut SYMBOL HFBST HFFLT HFCUT LFBST LFFLT LFCUT TEST CONDITION BCT="1",TREB="1111", f=10kHz TRBE="0000",f=10kHz BCT="0",TRBE="1111", f=10kHz BCB="1",BASS="1111", f=100Hz BASS="0000",f=100Hz BCB="0",BASS="1111", f=100Hz MIN. 12.5 -2.0 -17.5 12.5 -2.0 -17.5 TYP. 15.0 0.0 -15.0 15.0 0.0 -15.0 MAX. 17.5 2.0 -12.5 17.5 2.0 -12.5 UNIT dB dB dB dB dB dB
AGC CONTROL(AGC-ON)
PARAMETER AGC Boost AGC Flat1 AGC Flat2 AGC Flat3 AGC Flat4 AGC Cut SYMBOL AGCBST AGCFLT1 AGCFLT2 AGCFLT3 AGCFLT4 AGCCUT TEST CONDITION Vin=50mVrms, f=1kHz Vin=150mVrms, f=1kHz Vin=300mVrms, f=1kHz Vin=400mVrms, f=1kHz Vin=540mVrms, f=1kHz Vin=2Vrms, f=1kHz MIN. 1.5 -2.5 -2.5 -2.5 -2.5 -14 TYP. 3.5 0.0 0.0 0.0 0.0 -10 MAX. 5.5 2.5 2.5 2.5 2.5 -6.0 UNIT dB dB dB dB dB dB
BBE(BBE-ON)
PARAMETER BBE Low Frequency Boost Range BBE High Frequency Boost Range SYMBOL BBELOW BBEHIGH TEST CONDITION BBE-Low="1111", f = 50Hz BBE-High="1111", f = 10KHz MIN. TYP. 15.0 15.0 MAX. UNIT dB dB
SIMULATED SURROUND PARAMETER SURROUND SIM A SURROUND SIM B SRS 3D-Stereo SRS GAIN HIGH 1 SRS GAIN HIGH 2 SRS GAIN LOW 1 SRS GAIN LOW 2 SRS GAIN HIGH 3 SRS GAIN HIGH 4
(Simulated Surround-ON, f=1kHz) SYMBOL SRSIMA SRSIMB TEST CONDITION Ain+Bin Aout Ain+Bin Bout MIN. 1.0 1.0 TYP. 3.0 3.0 MAX. 5.0 5.0 UNIT dB dB
(SRS 3D Stereo-ON, f=125Hz) SYMBOL SRSGH1 SRSGH2 SRSGL1 SRSGL2 SRSGH3 SRSGH4 TEST CONDITION Ain Aout, Mode=High Bin Bout, Mode=High Ain Aout, Mode=Low Bin Bout, Mode=Low Bin Aout, Mode=High Ain Bout, Mode=High MIN. 10.0 10.0 4.0 4.0 6.8 6.8 TYP. 12.0 12.0 6.0 6.0 8.8 8.8 MAX. 14.0 14.0 8.0 8.0 10.8 10.8 UNIT dB dB dB dB dB dB
PARAMETER
-4-
NJW1155
s I C BUS BLOCK CHARACTERISTICS (SDA,SCL) PARAMETER High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current Low Level Output Voltage (3mA at SDA pin) Maximum Output Current Maximum Clock Frequency Data Change Minimum Waiting Time Data Transfer Start Minimum Waiting Time Low Level Clock Pulse Width High Level Clock Pulse Width Minimum Start Preparation Waiting Time Minimum Data Hold Time Minimum Data Preparation Time Rise Time Fall Time Minimum Stop Preparation Waiting Time I C BUS Load Condition:
2 2
SYMBOL VIH VIL IIH IIL VOL IOL fSCL tBUF tHD:STA tLOW tHIGH tSU:STA tHD:DAT tSU:DAT tR tF tSU:STO
MIN. 3.0 0 0 -3.0 4.7 4.0 4.7 4.0 4.7 0 250 4.0
TYP. -
MAX. 5.0 1.5 10 10 0.4 100 3.45 1.0 300 -
UNIT V V A A V mA kHz s s s s s s ns s ns s
Pull up resistance 4k (Connected to +5V) Load capacitance 200pF (Connected to GND)
SDA
tBUF
tR
tF
tHD:STA
SCL
tHD:STA tLOW P S
tHD:DAT
tHIGH
tSU:DAT Sr
tSU:STA
tSU:STO P
-5-
NJW1155
s APPLICATION CIRCUIT
4.7 1 3.3n 33n 2 3 4 4.7 5 4.7n 6 100n 4.7 8 1 9 22n 10 11 4.7 12 13 14 15 BBEOUTa SDA SCL GND BBEOUTb AUX0 AUX1 Vcc 19 18 17 16 SRS/SS-FIL1 VOL2INa VREF VOL2INb 21 20 AGC SRS-FIL2 22 OUTa OUTb 23 7 TONE-Ha TONE-La TONE-Hb TONE-Lb 25 TONEDC2a TONEDC2b 26 INa BBE1a BBE2a INb BBE1b BBE2b 30 29 28 27
4.7
3.3n 33n
TONEDC1a TONEDC1b
4.7 4.7n
330nF
24
100n 4.7
4.7K 8.2n
4.7
4.7
22
-6-
NJW1155
s DEFINITION OF I C REGISTER 2 I C BUS FORMAT
MSB LSB MSB LSB MSB LSB
2
S
1bit
Slave Address
8bit
A
1bit
Select Address
8bit
A
1bit
Data
8bit
A
1bit
P
1bit
S: Starting Term A: Acknowledge Bit P: Ending Term SLAVE ADDRESS
MSB LSB
1
0
0
0
0
0
1
R/W
R/W=0: Receive Only R/W=1: No Output Data CONTROL REGISTER TABLE The select address sets each function (Volume, Balance, AGC, Surround, Tone Control, BBE, AUX). The auto increment function cycles the select address as follows. 00H01H02H03H04H05H00H Select Address
BIT D7
CHS BCB BCT BBE(Lo Contour) OUT
Don't care Don't care
D6
D5
D4
VOL BAL BASS TREB
D3
D2
D1
AGC
D0
SUR
Don't care Don't care
00H 01H 02H 03H 04H 05H
BCSB BCST
Don't care Don't care
BBE(Process) SUR0 AGC1 AGC0 AUX1 AUX0
CONTROL REGISTER DEFAULT VALUE Control register default value is all "0". Select Address
BIT D7
0 0 0 0 0 0
D6
0 0 0 0 0 0
D5
0 0 0 0 0 0
D4
0 0 0 0 0 0
D3
0 0 0 0 0 0
D2
0 0 0 0 0 0
D1
0 0 0 0 0 0
D0
0 0 0 0 0 0
00H 01H 02H 03H 04H 05H
-7-
NJW1155
INSTRUCTION CODE a) MASTER VOLUME SETTING
Select Address 00H BIT D7 D6 D5 D4 VOL D3 D2 D1 D0
The volume control for both Ach and Bch(0.33dB/step). The volume is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. b) BALANCE, AGC AND SURROUND SETTING
Select Address 01H BIT D7 CHS D6 D5 D4 BAL D3 D2 D1 AGC D0 SUR
*CHS : Channel select for balance control "0" : Ach "Bch is attenuated" "1" : Bch "Ach is attenuated" *BAL : Balance control for both Ach and Bch(1dB/Step) The balance is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. *AGC : AGC switch "0" : AGC OFF "1" : AGC ON (Default Setting : 150mVrms) *SUR : Surround mode switch "0" : Surround OFF "1" : Surround ON(Default Setting : Surround Effect1) c)TONE CONTROL BASS SETTING
Select Address 02H BIT D7 BCB D6 D5 BASS D4 D3 D2 BCSB D1
Don't Care
D0
Don't Care
*BCB : Boost cut select for Bass control "0" : Cut "1" : Boost *BASS: BASS control Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) *BCSB : Boost cut select for SUB-BASS control "0" : Cut "1" : Boost
-8-
NJW1155
d) TONE CONTROL TREBLE SETTING
Select Address 03H BIT D7 BCT D6 D5 TREB D4 D3 D2 BCST D1
Don't Care
D0
Don't Care
*BCT : Boost cut select for Treble control "0" : Cut "1" : Boost *TREB: Treble control(1dB/step) Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) *BCST : Boost cut select for Sub-Treble control "0" : Cut "1" : Boost e) BBE Boost Level Setting
Select Address 04H BIT D7 D6 D5 D4 D3 D2 D1 D0
BBE(Lo Contour)
BBE(Process)
* BBE Lo Contour * BBE Process
: 0dB to 15dB(1dB/step) : 0dB to 15dB (1dB/step)
When all bits are "0"(=00H), BBE becomes off f)OUTPUT AND AUXILIARY SETTING
Select Address 05H BIT D7 OUT D6
Don't Care
D5
Don't Care
D4 SUR0
D3 AGC1
D2 AGC0
D1 AUX1
D0 AUX0
*OUT: ON/OFF Switch for OUTPUT "0" : OFF "1" : ON *Surround Setting Surround Function SUR0(05H:D4) SUR(01H:D0), Surround OFF 0 0 Surround Effect1 0 1 Surround Effect2 1 1 Simulated Stereo 1 0 *AGC Level Setting AGC Level AGC1(D3) AGC0(D2) 150mVrms 0 0 300mVrms 0 1 400mVrms 1 0 540mVrms 1 1 *AUX1/AUX0: Auxiliary port High/Low "0" : Logic output "Low" "1" : Logic output "High"
Remarks Surround OFF
SRS 3D-Stereo - Low Mode SRS 3D-Stereo - High Mode
Simulated Stereo
-9-
NJW1155
MASTER VOLUME (Select Address : 00H)
VOL Gain(dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 HEX FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 D7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 D3 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 D2 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 D1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
- 10 -
NJW1155
MASTER VOLUME (Select Address : 00H)
VOL Gain(dB) -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 -81 -82 -83 -84 Mute HEX 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 0C 09 06 03 00 D7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 D3 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 D2 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
- 11 -
NJW1155
BALANCE(Select Address : 01H)
Channel Select (CHS) Ach(Bch is attenuated) Bch(Ach is attenuated) D7 0 1
BAL
Gain(dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 Mute D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D4 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D3 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
- 12 -
NJW1155
TONE CONTROL BASS (Select Address : 02H)
Bass Cut or Boost Cut Boost BCB D7 0 1
BASS Cut Gain(dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain(dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D6 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D5 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D4 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D3 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
- 13 -
NJW1155
TONE CONTROL TREBLE (Select Address : 03H)
Treble Cut or Boost Cut Boost BCT D7 0 1
TREB Cut Gain(dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain(dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D6 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D5 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D4 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D3 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
- 14 -
NJW1155
BBE (Lo Contour) / (Process) Gain Code (Select Address : 04H)
Lo Contour Cut Gain(dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain(dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D7 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D6 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D5 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D4 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 D3 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Process D2 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
- 15 -
NJW1155
sNOTE 1)The NJW1155 is manufactured by New Japan Radio Co., Ltd. under license from BBE Sound Inc. BBE is a registered trademark of BBE Sound Inc. A license from BBE Sound Inc. is required before the NJW1155 can be purchased from New Japan Radio Co., Ltd. BBE Sound, Inc. 5381 Production Drive Huntington Beach, CA 92649 Tel:(714)897-6766 Fax:(714)896-0736 2)The SRS technology right incorporated in the NJW1155 is owned by SRS Labs, a U.S. Corporation and licensed to New Japan Radio Co., Ltd. SRS is protected under U.S. and foreign patents issued and/or pending. SRS and the , are trademarks of SRS Labs, Inc. in the United States and selected foreign countries. Neither the purchase of the NJW1155, nor the corresponding sale of audio enhancement equipment conveys the right to sell commercialized recording made with any SRS technology. SRS Labs requires that all users of the NJW1155 must enter into a license agreement directly with SRS Labs if the royalty is not included in the purchase price. SRS Labs also requires any users to comply with all rules and regulations as outlined in the SRS Trademark Usage Manual. For further information, please contact: SRS Labs, Inc. 2909 Daimler Street, Santa Ana, CA 92705 USA Tel : (949)442-1070 Fax: : (949)852-1099
www.srslabs.com
[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
- 16 -

▲Up To Search▲

Price & Availability of NJW1155

	To Download NJW1155 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .